Handy little hard rubber washers to put under your X-Aktrak to level on slightly uneven surfaces, or on top between your track and accessories to protect the finish. A small item that can make a big difference!

The feel of the grooves when you tighten this knob down give you that warm and fuzzy feeling that your gear is secure. The Du-Bro Twister Track Knob is offered in 5 different color options, and are great to hold down accessories on your X-Aktrak and Krossbars.

You can also grab onto the twister wings on top of the knob to torque the knob down & get the tightest fit possible. The wings also protect the shaft of the bolt as well as preventing snagging lose lines. The Twister Track Knobs are made in the USA!

This is just a simple gasket for a Marinco® 70A Receptacle, but it will keep the water from leaking in around your plug and that’s a pretty cool thing.

We couldn’t find one of these for our own kayak installs, so we decided to have them made for ourselves and now you too!

Need a little lift for your Ketch X-Aktrak Krossbar? This is what you need to raise your bar for the world to see, well maybe just for you to see, or for your pedals to clear.

Our 2 inch riser will bring your Krossbar up 2 inches for improved visibility or to avoid clearance issues with pedals or other equipment. These are milled from solid aluminum and 100% made in the USA!

This little gem is a lifesaver when trying to adjust the height of accessories and mounts above your X-Aktrak HD Krossbar or for your X-Aktrak HD tracks.  Milled to exactly fit in the slot of the X-Aktrak HD and also to nest with each other, these can be stacked to get the exact height adjustment you need. Whether you’re adjusting for clearance or visibility we’ve got you covered with the Ketch X-Aktrak 1/2 inch spacer!

Need a little lift for your Ketch X-Aktrak Krossbar? This is what you need to raise your bar for the world to see, well maybe just for you to see, or for your pedals to clear.

Our 4 inch riser will bring your Krossbar up 4 inches for improved visibility or to avoid clearance issues with pedals or other equipment. These are milled from solid aluminum and 100% made in the USA!

This little gem is a lifesaver when trying to adjust the height of accessories and mounts above your X-Aktrak HD Krossbar or for your X-Aktrak HD tracks.  Milled to exactly fit in the slot of the X-Aktrak HD and also to nest with each other, these can be stacked to get the exact height adjustment you need. Whether you’re adjusting for clearance or visibility we’ve got you covered with the Ketch X-Aktrak 1 inch spacer!

Ball mount with T-Bolt for mounting into t-track. The YakAttack ScrewBall™ is a 1″ ball mount that is compatible with al Ketch X-Aktrak HD and LT track and the Delete Plates with a 1/4-20 hole for mounting a Ball mount. Made in the USA!

This is a simple Sacrificial Plate to replace flush mount rod tubes on popular Old Town® kayak models for either sealing them off from leaking water, or you can drill into them to mount accessories to utilize that wasted space.

Constructed in the USA with 6061 aluminum, clean and efficient installation with existing hardware.

Hobie® PA kayak owners this is for you, the Ketch H-Rail Adapters that let you put our X-Aktrak HD right on your Hobie® H-Rail for a mounting solution that is as solid as a rock.

There’s always more accessories and this will let you make more room for them, just pair these with X-Aktrak HD and the possibilities are endless, from mounting heavy fish finders to big heavy items like Downriggers this will handle whatever you throw at it. Bonus the X-Aktrak comes in colors so you’ll also look good on the water. These are not standalone, so you’ll need some of our X-Aktrak to make this work.

Direct bolt on replacement for flush mount rod tubes on select Old Town® kayaks*. This eliminates the rear rod tube and gives you a water tight seal, and a 1/4-20 Screw to mount your favorite compatible Ram or YakAttack Ball Mount to. 100% Made in the USA from 6061 aluminum.

This kit allows you to bolt a 26″ X-Aktrak HD Krossbar directly to your Hobie® Pro Angler 12 or 14 equipped with Ketch Jake plates. Adapts 26″ Krossbar to Hobie PA 14, or 22″ Krossbar to Hobie® PA 12. Easy bolt on installation to Ketch Jake Plates, there’s even a video to show you how. Not recommended with stock plastic mounting plates. 100% Made in the USA!

Blemished finish but still highly functional, this 22″ Krossbar is a beast and will span many of the widest kayaks for easy dual graph installation. Make a durable and functional dashboard on your kayak with Ketch Krossbars! This is the size for you if you own a Hobie® PA 12 kayak and want to expand your mounting options.

Ketch Krossbars are made from our X-Aktrak HD profile and fit most T-bolts and T-Track Accessories. Compatible with our Risers and spacers to put your Krossbar and accessories in exactly the right spot.

Blemished finish but still highly functional, this 24″ Krossbar is a beast and will span many of the widest kayaks for easy dual graph installation. Make a durable and functional dashboard on your kayak with Ketch Krossbars! This is the Krossbar size that works with the NuCanoe Unlimited Kayak and other NuCanoe Models too!

Ketch Krossbars are made from our X-Aktrak HD profile and fit most T-bolts and T-Track Accessories. Compatible with our Risers and spacers to put your Krossbar and accessories in exactly the right spot.

This is a cosmetically blemished but fully functional 26″ X-Aktrak Krossbar. If you’re looking for a super solid aluminum crossbar mounting solution you can’t go wrong with the Ketch 26″ X-Aktrak HD Krossbar. This bar is solid and perfect for mounting dual graphs or extra large single graphs right in front of you where they are out of the way and highly visible so you can focus on fishing instead of working around your electronics. It’s also available in several anodized aluminum colors because you should look good while you’re on the water too!
This Krossbar fits Hobie® Pro Angler 14, Bonafide SS127 and PWR 129 kayaks, and might fit your kayak but check the gallery images for sizing charts.

Hobie® Pro Angler 12 owners, If you’re looking for a super solid aluminum crossbar mounting solution you can’t go wrong with the Ketch 22″ X-Aktrak HD Krossbar. This bar is solid and perfect for mounting dual graphs or extra large single graphs right in front of you where they are out of the way and highly visible so you can focus on fishing instead of working around your electronics.

It can also work for other kayak models so check the sizing graphic in the image gallery to see if it will work for your kayak as well.

Direct bolt on replacement for flush mount rod tubes on select Old Town® kayaks*. This eliminates the rear rod tube and gives you a water tight seal, and 2.75″ of t-track to mount your favorite T-bolt accessories. 100% Made in the USA from 6061 aluminum.

The Ketch Hobie H-Rail Mounting Plate is made for mounting a standard Scotty® base to your Hobie® H-rail. This gives you a super solid platform for mounting Scotty® accessories like Downriggers and other heavy items. When paired with the Scotty® Base it works with all Scotty® Accessories.

100% American Made from 6061 billet aluminum for the stiffest available mounting option on the market.

Build your dashboard with the Ketch 24″ X-Aktrak HD Krossbar. If you’re looking for a super solid aluminum crossbar mounting solution you can’t go wrong with the Ketch X-Aktrak HD Krossbar. This is the right bar for the NuCanoe Unlimited and most other NuCanoe kayaks as well.

This bar is solid and perfect for mounting dual graphs or extra large single graphs right in front of you where they are out of the way and highly visible so you can focus on fishing instead of working around your electronics.

If you’re looking for a super solid aluminum crossbar mounting solution you can’t go wrong with the Ketch 26″ X-Aktrak HD Krossbar. This bar is solid and perfect for mounting dual graphs or extra large single graphs right in front of you where they are out of the way and highly visible so you can focus on fishing instead of working around your electronics. It’s also available in several anodized aluminum colors because you should look good while you’re on the water too!

This Krossbar fits Hobie® Pro Angler 14, Bonafide SS127 and PWR 129 kayaks, and might fit your kayak but check the gallery images for sizing charts.

Bling out your Hobie® PA 12 or PA14 180 with Ketch Products PA Steering Handles, and bonus you’ll save money with this bundle deal!

You’ll get two Ketch PA Aluminum Steering Handles in your choice of Anodized Aluminum colors and the option to add the Steering Knobs as well if you want the added grip space for faster and easier steering adjustments.

Lookin’ Good, feelin’ good, and saving money with Ketch Products upgrades for your Hobie kayak!

Great Lakes and Saltwater Hobie® PA 14 owners, you can prevent the most common leak associated with your kayak by sealing up the rod tubes with our Rod Tube Delete Plates. Comes with all the hardware and backing plates you’ll need as well as the silicone gasket, to seal these up and keep that water out of your hull. If you’ve ever had your Hobie® PA 14 in big waves you know exactly what these are for.

Made 100% in the USA!