Introducing the first kayak/small boat quick release bracket that was designed as a complete motor system. Poorly designed factory mounts are a drain on speed and efficiency, and sloppy quick release setups only serve to multiply the issues. Our platform specific solutions give your motor the correct angle, and thus more efficiency… and yes, more speed.

The Ketch Kwik Release is compatible with all of our bow mount motor systems, and ideal for the DIY’er looking to get the most performance out of their homemade mount.

• All Stainless Steel hardware.
• Compatible with Minn Kota® and Motor Guide® trolling motors.
• Works with all Ketch platform specific motor mount systems.
• Faster and more efficient than the competition, so you’re faster and more efficient than your competition.

If you’re looking for a super solid aluminum crossbar mounting solution you can’t go wrong with the Ketch 26″ X-Aktrak HD Krossbar. This bar is solid and perfect for mounting dual graphs or extra large single graphs right in front of you where they are out of the way and highly visible so you can focus on fishing instead of working around your electronics. It’s also available in several anodized aluminum colors because you should look good while you’re on the water too!

This Krossbar fits Hobie® Pro Angler 14, Bonafide SS127 and PWR 129 kayaks, and might fit your kayak but check the gallery images for sizing charts.

This kit allows you to bolt a 26″ X-Aktrak HD Krossbar directly to your Hobie® Pro Angler 12 or 14 equipped with Ketch Jake plates. Adapts 26″ Krossbar to Hobie PA 14, or 22″ Krossbar to Hobie® PA 12. Easy bolt on installation to Ketch Jake Plates, there’s even a video to show you how. Not recommended with stock plastic mounting plates. 100% Made in the USA!

Hey Hobie® PA 12 kayak owners! Bundle with Ketch and Save a Bundle! Get everything you need to have a Ketch X-Aktrak HD Krossbar on your PA 12 kayak

The Ketch Krossbar, Jake Plates and the Adapter kit, all in one bundle so you’re ready to go with a solid base to mount your dual graphs onto after an easy install.

Everything included is 100% Made in the USA!

Great Lakes and Saltwater Hobie® PA 14 owners, you can prevent the most common leak associated with your kayak by sealing up the rod tubes with our Rod Tube Delete Plates. Comes with all the hardware and backing plates you’ll need as well as the silicone gasket, to seal these up and keep that water out of your hull. If you’ve ever had your Hobie® PA 14 in big waves you know exactly what these are for.

Made 100% in the USA!

Make sure your kayaks trolling motor is wired right with the Ketch Infiniti Flex Motor Wire Kits. Available in 12 and 14 ft. lengths. These DIY-friendly wiring kits are perfect for 12V, 24V, and 36V applications.

Premium 6- AWG tinned copper wires to ensure a smooth flow of current to your trolling motor. Using the correct gauge wire, like those included in the Ketch Infiniti Flex Motor Wire Kits, is crucial for preventing electrical issues and keeping your motor running strong. These twisted pair cables also reduce electromagnetic interference (EMI), protecting your fish finder’s transducer from signal interference.

Upgrading to Ketch Products’ aluminum OT-1 T-tracks for Old Town Kayaks* offers significant advantages over the standard plastic tracks. The 6061 aluminum one-piece construction provides superior strength and stability, making it ideal for heavy-duty rigging and trolling applications.

These direct bolt-on replacements utilize existing hardware and require no drilling, ensuring a seamless and straightforward installation process. By upgrading to these aluminum tracks, kayak anglers can enjoy increased durability, reduced flexing under force, and improved overall performance for mounting accessories like rod holders and fish finders.

This is just a simple gasket for a Marinco® 70A Receptacle, but it will keep the water from leaking in around your plug and that’s a pretty cool thing.

We couldn’t find one of these for our own kayak installs, so we decided to have them made for ourselves and now you too!

Buy the Ketch PWR129 Bow Motor Mount and the Ketch Kwik Release Trolling Motor Bracket together in this bundle and save!

Get the fastest mount for the Bonafide PWR129 kayak and the best Kwik Release as well with the most solid connection between the motor and mount.

You’ll feel the quality of this electric motor mounting plate for the Bonafide® SS127 when you first touch it and then you’ll understand why it’s so rigid when pick it up.  The aluminum construction of this motor mounting plate will give your electric motor all of the durability and Stability you need to get the maximum speed out of your kayak.

This mount works with Torqeedo®* and Newport®** Electric Motors and even has room for mounting a Power Pole® Micro***. and includes all hardware and backing plates to make your install effortless and without letting water into your kayak. Mount it right the first time with Ketch!

Not just made, engineered, to be the lightest weight, lowest profile, most solid bow motor mount for the Bonafide® SS127 kayak. Made of 6061 Aluminum and includes all stainless steel mounting hardware for installation.

Compatible with the Ketch Kwik Release and other popular Bow Mount Trolling Motor Brackets. 100% Made in the USA!

You’ll look good in your kayak that’s lookin’ good with this Ketch X-Aktrak LT kit comes with 6 pieces of upgraded t-tracks and everything you need to make your Bonafide® SS127 kayak the envy of your friends. Not only does it improve how your kayak looks, but you’ll have a great set of lightweight aluminum tracks that will last.

Installation is super easy with a direct-bolt on system with all stainless steel hardware included, you just need a Phillips screwdriver and almost anyone can install these tracks!

This is a simple Sacrificial Plate to replace flush mount rod tubes on popular Old Town® kayak models for either sealing them off from leaking water, or you can drill into them to mount accessories to utilize that wasted space.

Constructed in the USA with 6061 aluminum, clean and efficient installation with existing hardware.

Ketch X-Aktrak HD 2″ Stubby

Ketch X-Aktrak HD T tracks are a more robust take on commonly used light-profile T tracks.

Our HD line offers a Compact and extremely stable footprint for everything from action cams to downriggers.

This track profile is compatible with most commonly used 1/4-20 T-studs and nuts, so no need to buy specialized brackets or more expensive mounting hardware.

Our 2″ (1.75″ actual) stubby mount is ideal for anglers or enthusiasts who are trying to make the most of tight spaces.

• 6061 Aluminum Construction
• 2″, 6″, 12″, and 18″ standard sizes
• 6 stock colors – Anodized finish
• Stainless steel mounting hardware included

Ketch X-Aktrak HD T tracks are a more robust take on commonly used light-profile T tracks.

Our HD line offers a Compact and extremely stable footprint for everything from action cams to downriggers.

This track profile is compatible with most commonly used 1/4-20 T-studs and nuts, so no need to buy specialized brackets or more expensive mounting hardware.

Our 6″ HD track is ideal for anglers or enthusiasts who are trying to make the most of tight spaces.

• 6061 Aluminum Construction
• 2″, 6″, 12″, and 18″ standard sizes
• 6 stock colors – Anodized finish
• Stainless steel mounting hardware included

Ketch X-Aktrak HD 12″

The HD T tracks are a more robust take on commonly used light-profile T tracks.

Our HD line offers a Compact and extremely stable footprint for everything from action cams to downriggers.

This track profile is compatible with most commonly used 1/4-20 T-studs and nuts, so no need to buy specialized brackets or more expensive mounting hardware.

Our 12″ X-Aktrak HD track is ideal for larger spans of track.

• 6061 Aluminum Construction
• 2″, 6″, 12″, and 18″ standard sizes
• 6 stock colors – Anodized finish
• Stainless steel mounting hardware included

Ketch X-Aktrak HD 18″

The HD T tracks are a more robust take on commonly used light-profile T tracks.

Our HD line offers a Compact and extremely stable footprint for everything from action cams to downriggers.

This track profile is compatible with most commonly used 1/4-20 T-studs and nuts, so no need to buy specialized brackets or more expensive mounting hardware.

Our 18″ X-Aktrak HD track is ideal for larger spans of track.

• 6061 Aluminum Construction
• 2″, 6″, 12″, and 18″ standard sizes
• 6 stock colors – Anodized finish
• Stainless steel mounting hardware included

If you love to maximize the functionality of your kayak, while also making it look freaking awesome we’ve got you. This is a single 6 inch piece of our X-Aktrak LT, the lightweight track that still has plenty of solid mounting surface to hold your T-track mounted accessories. It also comes with mounting hardware so installation is a breeze! It’s from Ketch so of course it’s 100% made in the USA!

If you love to maximize the functionality of your kayak, while also making it look freaking awesome we’ve got you. This is a single 12 inch piece of our X-Aktrak LT, the lightweight track that still has plenty of solid mounting surface to hold your T-track mounted accessories. It also comes with mounting hardware so installation is a breeze! It’s from Ketch so of course it’s 100% made in the USA!

If you love to maximize the functionality of your kayak, while also making it look freaking awesome we’ve got you. This is a single 18 inch piece of our X-Aktrak LT, the lightweight track that still has plenty of solid mounting surface to hold your T-track mounted accessories. It also comes with mounting hardware so installation is a breeze! It’s from Ketch so of course it’s 100% made in the USA!

Need a little lift for your Ketch X-Aktrak Krossbar? This is what you need to raise your bar for the world to see, well maybe just for you to see, or for your pedals to clear.

Our 2 inch riser will bring your Krossbar up 2 inches for improved visibility or to avoid clearance issues with pedals or other equipment. These are milled from solid aluminum and 100% made in the USA!

Need a little lift for your Ketch X-Aktrak Krossbar? This is what you need to raise your bar for the world to see, well maybe just for you to see, or for your pedals to clear.

Our 4 inch riser will bring your Krossbar up 4 inches for improved visibility or to avoid clearance issues with pedals or other equipment. These are milled from solid aluminum and 100% made in the USA!