Handy little hard rubber washers to put under your X-Aktrak to level on slightly uneven surfaces, or on top between your track and accessories to protect the finish. A small item that can make a big difference!

The feel of the grooves when you tighten this knob down give you that warm and fuzzy feeling that your gear is secure. The Du-Bro Twister Track Knob is offered in 5 different color options, and are great to hold down accessories on your X-Aktrak and Krossbars.

You can also grab onto the twister wings on top of the knob to torque the knob down & get the tightest fit possible. The wings also protect the shaft of the bolt as well as preventing snagging lose lines. The Twister Track Knobs are made in the USA!

This is just a simple gasket for a Marinco® 70A Receptacle, but it will keep the water from leaking in around your plug and that’s a pretty cool thing.

We couldn’t find one of these for our own kayak installs, so we decided to have them made for ourselves and now you too!

Need a little lift for your Ketch X-Aktrak Krossbar? This is what you need to raise your bar for the world to see, well maybe just for you to see, or for your pedals to clear.

Our 2 inch riser will bring your Krossbar up 2 inches for improved visibility or to avoid clearance issues with pedals or other equipment. These are milled from solid aluminum and 100% made in the USA!

This little gem is a lifesaver when trying to adjust the height of accessories and mounts above your X-Aktrak HD Krossbar or for your X-Aktrak HD tracks.  Milled to exactly fit in the slot of the X-Aktrak HD and also to nest with each other, these can be stacked to get the exact height adjustment you need. Whether you’re adjusting for clearance or visibility we’ve got you covered with the Ketch X-Aktrak 1/2 inch spacer!

The Ketch Board Tether is by far our most popular tether and it’s the best way to make sure your Ketch board stays above water. The Ketch Tether is lightweight and has a larger diameter nylon core for added strength and improved coil memory. Each tether stretches several feet and quickly retracts back to its compact size.

Comes with a Carabiner on one end to clip to your kayak, and can be ran through the board tether hole and then itself to secure it to the board. Built to Last for Ketch by Neverlost Gear right here in the USA!

Need a little lift for your Ketch X-Aktrak Krossbar? This is what you need to raise your bar for the world to see, well maybe just for you to see, or for your pedals to clear.

Our 4 inch riser will bring your Krossbar up 4 inches for improved visibility or to avoid clearance issues with pedals or other equipment. These are milled from solid aluminum and 100% made in the USA!

This little gem is a lifesaver when trying to adjust the height of accessories and mounts above your X-Aktrak HD Krossbar or for your X-Aktrak HD tracks.  Milled to exactly fit in the slot of the X-Aktrak HD and also to nest with each other, these can be stacked to get the exact height adjustment you need. Whether you’re adjusting for clearance or visibility we’ve got you covered with the Ketch X-Aktrak 1 inch spacer!

The Ketch Rod Tether with Quick Disconnect was designed to keep your valuable rods secured while out kayak fishing. Nothing hurts like losing a rod while on the water. 100% Made in the USA!

The quick release strap was made to stay on the item you want have leashed so you can use it freely and then simply clip it back on the leash. Just a simple cow knot and adjust the cord lock and you are set! However with the generous 8 foot plus stretch the gear can be used a lot of times while still leashed without the need to detach the strap.

Ball mount with T-Bolt for mounting into t-track. The YakAttack ScrewBall™ is a 1″ ball mount that is compatible with al Ketch X-Aktrak HD and LT track and the Delete Plates with a 1/4-20 hole for mounting a Ball mount. Made in the USA!

If you love to maximize the functionality of your kayak, while also making it look freaking awesome we’ve got you. This is a single 6 inch piece of our X-Aktrak LT, the lightweight track that still has plenty of solid mounting surface to hold your T-track mounted accessories. It also comes with mounting hardware so installation is a breeze! It’s from Ketch so of course it’s 100% made in the USA!

No one wants to be up creek without a paddle! The Ketch Paddle Leash with Quick Disconnect was designed to keep your absolute most valuable item while out kayak fishing secure and with you, your paddle.

Available in many colors to match your gear or stand out. Made 100% in the USA!

Ketch X-Aktrak HD 2″ Stubby

Ketch X-Aktrak HD T tracks are a more robust take on commonly used light-profile T tracks.

Our HD line offers a Compact and extremely stable footprint for everything from action cams to downriggers.

This track profile is compatible with most commonly used 1/4-20 T-studs and nuts, so no need to buy specialized brackets or more expensive mounting hardware.

Our 2″ (1.75″ actual) stubby mount is ideal for anglers or enthusiasts who are trying to make the most of tight spaces.

• 6061 Aluminum Construction
• 2″, 6″, 12″, and 18″ standard sizes
• 6 stock colors – Anodized finish
• Stainless steel mounting hardware included

The Ketch Church Key is a Crab Gauge for Pacific Coast Anglers. It’s designed as a 3 in 1 gauge for Spiny Lobster, Rock crab, and Dungeness Crab.

This gauge is built of Stainless Steel and is the most accurate consumer gauge on the market. 100% Made in the USA!

This is a simple Sacrificial Plate to replace flush mount rod tubes on popular Old Town® kayak models for either sealing them off from leaking water, or you can drill into them to mount accessories to utilize that wasted space.

Constructed in the USA with 6061 aluminum, clean and efficient installation with existing hardware.

Ketch X-Aktrak HD T tracks are a more robust take on commonly used light-profile T tracks.

Our HD line offers a Compact and extremely stable footprint for everything from action cams to downriggers.

This track profile is compatible with most commonly used 1/4-20 T-studs and nuts, so no need to buy specialized brackets or more expensive mounting hardware.

Our 6″ HD track is ideal for anglers or enthusiasts who are trying to make the most of tight spaces.

• 6061 Aluminum Construction
• 2″, 6″, 12″, and 18″ standard sizes
• 6 stock colors – Anodized finish
• Stainless steel mounting hardware included

Hobie® PA kayak owners this is for you, the Ketch H-Rail Adapters that let you put our X-Aktrak HD right on your Hobie® H-Rail for a mounting solution that is as solid as a rock.

There’s always more accessories and this will let you make more room for them, just pair these with X-Aktrak HD and the possibilities are endless, from mounting heavy fish finders to big heavy items like Downriggers this will handle whatever you throw at it. Bonus the X-Aktrak comes in colors so you’ll also look good on the water. These are not standalone, so you’ll need some of our X-Aktrak to make this work.

If you love to maximize the functionality of your kayak, while also making it look freaking awesome we’ve got you. This is a single 12 inch piece of our X-Aktrak LT, the lightweight track that still has plenty of solid mounting surface to hold your T-track mounted accessories. It also comes with mounting hardware so installation is a breeze! It’s from Ketch so of course it’s 100% made in the USA!

Mount your Ketch Board anywhere with these kits. Once mounted your Ketch Board just slides in from the end for secure mounting and easy access. 100% Made in the USA!

Two kits available one with T-Bolts (Standard Kit) for mounting on T-tracks, and the other with bolts, washers and Lock Nuts (Krate Kit) for mounting on kayak crates.

Ketch X-Aktrak HD 12″

The HD T tracks are a more robust take on commonly used light-profile T tracks.

Our HD line offers a Compact and extremely stable footprint for everything from action cams to downriggers.

This track profile is compatible with most commonly used 1/4-20 T-studs and nuts, so no need to buy specialized brackets or more expensive mounting hardware.

Our 12″ X-Aktrak HD track is ideal for larger spans of track.

• 6061 Aluminum Construction
• 2″, 6″, 12″, and 18″ standard sizes
• 6 stock colors – Anodized finish
• Stainless steel mounting hardware included